Quick-Sil, Two-Part Silicone 1 kg
Code: 10882Product detailed description
No careful measuring - No messy liquids - No 12-24 hour wait for finished molds - No vulcanizer needed - No release sprays needed -- it's self lubricating - Can be used for direct casting of pewter & other low-temperature metals!
- Shore A Hardness: 40
- Mix Ratio by weight: 1:1
- Rubber Shrinkage: 0.0%
- Viscosity: Not a liquid
- Vulcanizes at 70° F/ 21°C
- Cure Time: 15 minutes
- Rapid Cure Time @150°F/ 65°C: Less than 15 minutes
- Specific Gravity: 1.32
- Elongation Before break: 550%
- Tensile Strength Before break: 660 psi 4.1 n/mm2
- Tear Strength Die C Before break: 115 lb./in. 20,1 n/mm
- Color: Light Green
Additional parameters
| Category: | Rubbers |
|---|---|
| Weight: | 1.3 kg |
| EAN: | 9410882 |
| Barva: | světle zelená |
| Doba tvrdnutí: | méně než 15 min |
| Mísící poměr: | 1:1 |
| Pevnost v tahu: | 4,1 n/mm2 |
| Pevnost v trhu: | 20,1 n/mm2 |
| Roztažnost: | 550 % |
| Smrštění: | 0,0 % |
| Tvrdost (Shore A): | 40 |
| Viskozita: | hlína |
| Vulkanizační teplota: | 21 °C |
Be the first who will post an article to this item!
Add a comment